Coast Manufacturing                         1-541-684-0743

small machines


 

Drain Cleaning Machines

  Warranty - Model Comparison

TM750
Standard Equipment
Cable Ends . Splices . Blade Chuck . Blade Set . Footswitch Allen Wrenches
  Model TM750 outclasses all other sewer cleaning machines. With its powerful ¾ HP dual capacitor motor, it easily clears lines up to 500 feet long and 10 inches in diameter. It's perfect balance allows for easy one-man operation. Welded tubular frame and self-lubricated sealed bearings ensures longevity and maintenance-free operation.
($1,795.00 CABLE NOT INCLUDED)
($2,150.00 WITH POWER CABLE FEEDER, CABLE NOT INCLUDED)

How to Order | Back to the Top of Page


TM5800
Standard Equipment
Cable Ends . Splices . Blade chuck . Blade Set Footswitch . Allen Wrenches
  Model TM5800 is the answer to clearing lines from 1 1/2" to 6". With 100' of 11/16" cable and weighing only 154 pounds, the TM5800 is easily rolled on its large 10" tires. Quick-reel interchange allows the use of either 3/8" x 90' cable or 1/2" x 80' cable for smaller 1 1/2" to 3" lines. Built-in ground fault interrupter insures your safety even in heavy water situations.
($1,625.00 CABLE NOT INCLUDED)
($1,980.00 WITH POWER CABLE FEEDER, CABLE NOT INCLUDED)

How to Order | Back to the Top of Page


TM50
Standard Equipment
Cable Ends . Cable Splices . Footswitch . Blade Set . Wheels . Pull Handle
 

Model TM50 is our midrange machine available with either a 3/8" x 90' cable or a 1/2" x 80' cable or both. This machine weighs only 85 pounds with the cable. It has a 1/3 HP motor with plenty of torque to clear lines from 1 1/2" to 3" with ease. Convenient pull handle for easy maneuverability. 
($950.00 CABLE NOT INCLUDED)

How to Order | Back to the Top of Page


TM38
Standard Equipment
3/8" Splice . 3/8" Cable End . Blade Set . Footswitch . Optional Wheel and Handle Assembly
 

Model TM38 is the same dependable power unit as the TM25, but with a larger drum carrying 75 feet of 3/8" cable. The TM38 is available with or without the wheel and handle assembly.  
($640.00 WHEELS AND PULL HANDLE NOT INCLUDED)
($700.00 WITH WHEELS AND PULL HANDLE)

How to Order | Back to the Top of Page


TM25
Standard Equipment
Footswitch . Flexible Trunk . Optional Wheel and Handle Assembly
 

Model TM25 is designed for direct access through sinks and tubs. This lightweight versatile machine carries 50 feet of 1/4" cable. The flexible trunk allows for easy access to hard to reach places while preventing kinking and splattering, making this one of your most frequently used machines.  
($620.00 WHEELS AND PULL HANDLE NOT INCLUDED)
($680.00 WITH WHEELS AND PULL HANDLE)

How to Order | Back to the Top of Page


TM24
Standard Equipment
1/4" x 35' Cable . Flexible Trunk
 

Model TM24 - Stop lugging around a machine that holds more cable than you can possibly use, just to clear a tub drain. Model TM24 weighs in at only 24 pounds including the 1/4" x 35' cable. The three-part drum allows you to put more torque on the cable while preventing kinking and bunching.
($505.00)

How to Order | Back to the Top of Page

     

Home | Warranty | Why | Model Comparison | Sitemap

coast
Copyright © 2017 Coast Manufacturing